Ifenprodil

Solubility;

Prepare 10% tartaric acid made in distilled water,

e.g. 1 g tartaric acid in 10 ml final volume.

Dissolve ifenprodil in 10% tartaric acid at 10x the desired final concentration

e.g. if you want a final concentration of 3 mg/ml, then dissovle 30 mg ifenprodil in 1 ml of 10% tartaric acid.

Then add 0.1M Phosphate buffer, 0.15M NaCl to bring the solution to the desired final concentration

e.g. add 9 ml of PBS to 30 mg ifenprodil dissolved in 1 ml of 10% tartaric acid

Bring the pH of the solution from ~pH 4 to ~ pH 7 by added a small amount of 10 N NaOH

e.g., add 10 N NaOH only 10 microliters at a time, checking pH with pH paper until the solution is neutralized.

it takes about 100 microliters of 10N NaOH to neutralize 10 ml of 1% tartaric acid, but add the NaOH bit by bit and check pH frequently.

Prepare vehicle of 0.1M PBS, 1% tartaric acid and pH to 7.0 as above.

e.g. mix 1 ml of 10% tartaric acid and 9 ml of 0.1M PBS, use 10 N NaOH to bring to pH 7.0.

Figure From: J. Allen, A synthesis of DL-erythro-2-(4-benzylpiperidino)-1-(4-hydroxyphenyl)-[1-14C]propan-1-OL L-(+)-tartrateJournal of Labelled Compounds and Radiopharmaceuticals Volume 17, Issue 6 , Pages 785 - 792