1,145
edits
Changes
→Supplies: added lots of plastics one cannula details
==Supplies==
==Supplies==
New Truliner Denture Lining Standard Kit, Pink [http://www.bosworth.com/product_detail.asp?PRD_ID=18 Bosworth #0921970] $45.00
===Plastics One Cannulas and Screws===
:[http://www.plastics1.com Plastics One]
:6591 Merriman Rd
:Roanoke VA 24018
:Tel: 540-772-7950
:Fax: 540-777-5900
''Check prices on annual price list.''
====22 Gauge guide cannulas for ventricular injections:====
Use C313 components, which provide 28 gauge dummy and injectors.
e.g., for guide cannula(G) projecting 5 mm below skull surface,
with large-cap dummy cannulas (DC) and injectors (I) projecting 1 mm beyond tip of the guide cannula:
:C313G/SPC 5 mm
:C313DC/SPC(LG) for 5 mm C313G with 1 mm projection
:C313I/SPC for 5 mm C313G with 1 mm projection
====26 Gauge guide cannulas for site-specific injections====
Use C315 components, which provide 33 gauge dummy and injectors.
e.g., for guide cannula(G) projecting 8 mm below skull surface,
with small-cap dummy cannulas (DC) and injectors (I) projecting 0.5 mm beyond tip of the guide cannula:
:C315G/SPC 8 mm
:C315DC/SPC(SM) for 8 mm C315G with 0.5 mm projection
:C315I/SPC for 8 mm C315G with 0.5 mm projection
====Screws for skull====
We use screws of 0-80 size with shaft length 3/32 inches (2.4 mm).
These are a little long, but they are stronger and easier to work with than 1/16 inch (1.6 mm) long screws.
Also need the small drill pit.
:0-80 X 3/32 (packages of 100)
:D#56 1.18 mm Drill Bit for 0-80 screws
----
===Other supplies needed - more detail to come===
====Pin Vise for hand drilling the screws====
Most pin vises are nickel plated, and so cannot be autoclaved but must be sterilized e.g. with 70% EtOH.
:VWR 63041-530 Pin Vise - Double-Ended, stainless steel
Little tubing for washer around top of guide cannula?
Superglue
Size of screwdriver? source of SS screw drivers?
Trephin drill bits
Hamilton microsyringe and needle
PE-50 tubing to connect with injector
Syringe Pump
====New Truliner Denture Lining Standard Kit, Pink====
From either Henry Schein Dental, #2502527EZ, $105.29, or,
[http://www.bosworth.com/product_detail.asp?PRD_ID=18 Bosworth #0921970] $45.00
:Harry J. Bosworth Company
:Harry J. Bosworth Company